Patton electronic 2710 - Manual (Page 8)

8
2.0 GENERAL INFORMATION
Thank you for purchasing this Patton Electronics product. This product
has been thoroughly inspected and tested and is warranted for One Year
parts and labor. If any questions arise during installation or use of the
unit, contact Patton Electronics Technical Services at (301) 975-1007.
2.1 FEATURES
• Terminates T1/FT1 Circuits over a 4-Wire RJ-48C interface
• Connects to standard CPE Serial Interfaces
• Common Framed nx56/64 rates up to 1.536 Mbps
• Unstructured Rates at 1.544 Mbps
• D4 or ESF Framing Modes
• Supports AMI or B8ZS/B7ZS Line Coding
• ConÞguration via Software Control Port or Internal DIP Switches
• Seven Easy-to-Read LED Indicators Monitor Data & Diagnostics
• Internal, External or Receive Recover Clocking
• Also Operates as a High-Speed Point-to-Point Modem
• Compact Size Plugs Directly into a Router, Switch or other DTE
• Made in USA
2.2 DESCRIPTION
The NetLink-T1™ Model 2710 Series are single port T1/FT1 CSU/DSUs
that provide high-speed WAN connectivity in an ultra-compact housing.
Plugging directly into the V.35 WAN port of a switch, router or multiplexer,
the NetLink-T1™ provides T1 or FT1 access at connection at data rates
of 1.544 Mbps, nx64, and nx56 (n=1 to 24 channels). The Netlink-T1™
is an excellent choice when terminating leased line services, Frame
Relay backbones, internet access as well as LAN-to-LAN services.
The Netlink-T1™ provides digital access to a local WAN service provider
or directly between two facilities over a dedicated 4-Wire circuit. LAN
bandwidth, framing and coding options are programmed via internally
accessible DIP switches or via a rear-mounted EIA-232 control port. The
Netlink-T1™ supports D4/ESF framing options and AMI/B8ZS/B7ZS line
coding. Netlink-T1™ also supports a full range of system and diagnostic
features that make system setup easy.