Patton electronic 2710 - Manual (Page 22)

22
– DS0 Channel ConÞguration Menu: [ Bandwidth/# Channels =
1,536/24 ] (default)
The DS0 Channel ConÞguration Menu has a sub-menu that looks like
this:
You may conÞgure the NetLink-T1™ to operate with any combination of
active and inactive DS0 channels in this screen. When you execute the
Save Changes command, the selected settings will be saved to perma-
nent memory, and the system will be updated to operate with the new
channel settings.
Note In Unframed format, the Bandwidth Selected will display
“1,544k,” and the Total Channels will display “n/a.” When the DS0
Channel Rate is 56kbps, the Bandwidth Selected will be a multi-
ple of 56k, not of 64k. When using the DIP switches to set the
bandwidth, the starting channel is always channel 1.