Patton electronic 2710 User Manual
Page 30
30
– Loop Timeout
The Loop Timeout setting can be set to one of the following:
00:05 = Þve minutes
00:10 = ten minutes
00:15 = Þfteen minutes
00:30 = thirty minutes (default setting)
00:45 = forty-Þve minutes
01:00 = one hour
01:30 = 90 minutes
02:00 = two hours
03:00 = three hours
NEVER = forever—the unit will remain in loopback without user
intervention.
– Set to Default ConÞguration
You may set the NetLink-T1™ to its factory default conÞguration, except
for the header lines and the password, by executing the Set to Default
ConÞguration command.
– Service Information
If you need to contact us for help, you can view the Service Information
screen. Here is what it looks like: