Pioneer AVIC-X9115BT - Manual (Page 86)

You can play a normal music CD using the
built-in drive of the navigation system. This
section describes how.
1 Insert the disc you want to play into
disc-loading slot.
Playback starts from the first track of the CD.
2 Touch [DISC] on the
“AV Source” menu
to display the
“CD” screen.
= For details concerning operations, refer to
Screen switching overview on page 34.
3 Use the touch panel keys on the screen
to control the disc.
Reading the screen
1 2 3 4
1 Source icon
Shows which source has been selected.
2 Track number indicator
Shows the number of the track currently play-
ing.
3 Scan/Random/Repeat indicator
The marks shown below indicate the current
playback status.
: Scan
: Random
and repeat range: Displays the current
repeat range
4 Play time indicator
Shows the elapsed playing time within the
current track.
Using the touch panel keys
Touch panel keys
1 2
3
4
5
6
7
1 Recall equalizer curves
= For details, refer to Recalling equalizer
curves on page 161.
2 Display the “Function” menu
= For details, refer to Using the
“Function” menu on the next page.
3 Switch the media file type played
= For details, refer to Switch the media
file type played on page 88.
4 Skip the track forward or backward
Touching [p] skips to the start of the next
track. Touching [o] once skips to the start
of the current track. Touching it again will skip
to the previous track.
Fast reverse or forward
Touch and hold [o] or [p] to fast rewind
or fast forward.
p Fast reverse is canceled when it reaches
the beginning of the first track on the
disc.
p Moving MULTI-CONTROL left or right
enables you to perform the equivalent
operations.
5 Playback and Pause
Touching [f] switches between “playback”
and
“pause”.
6 Shuffle All
All of the songs in the disc can be played at
random by touching only one key.
p [Shuffle All] is not available for AVIC-
X7115BT.
p To cancel random play, switch [Ran-
dom] to [Off] on the
“Function” menu.
7 Display the map screen
Playing audio CDs
En
86
Chapter
09