Adjusting loudness 162, Customizing preferences, Adjusting loudness – Pioneer AVIC-X9115BT User Manual
Page 162
— CD, ROM (for AVIC-X7115BT)
— XM and SIRIUS
— AV1 and AV2
— EXT1 and EXT2
! The different source volume level can be
set between
iPod and USB.
! When [Flat] is selected, no supplement or
correction is made to the sound. This is
useful to check the effect of the equalizer
curves by switching alternatively between
[
Flat] and a set equalizer curve.
Adjustable parameters
You can adjust the center frequency, level and
Q factor (curve characteristics) of each cur-
rently selected curve band (
Low/Mid/High).
! Band:
You can select the equalizer band.
! Frequency:
You can select which frequency to set as
the center frequency.
! Level:
You can select the decibel (dB) level of the
selected EQ.
! Q:
You can select the details of the curve char-
acteristics. (The following figure shows the
characteristic image.)
1
Touch [EQ] on the
“AV Sound Settings”
menu.
= For details, refer to Displaying the “AV
2
Touch the one of keys to select a curve
that you want to use as the basis of custo-
mizing.
3
Touch [Customize].
4
Touch [c] or [d] to select the equalizer
band to adjust.
Each time you touch [c] or [d] selects equali-
zer bands in the following order:
Low
— Mid — High
5
Touch [c] or [d] to select the desired
frequency.
Touch [c] or [d] until the desired frequency
appears in the display.
Low: 40 Hz
— 80 Hz — 100 Hz — 160 Hz
Mid: 200 Hz
— 500 Hz — 1 kHz — 2 kHz
High: 3.15 kHz
— 8 kHz — 10 kHz —
12.5 kHz
6
Touch [c] or [d] to adjust the level of
the equalizer band.
Each time you touch [c] or [d], the level of
the equalization band increases or decreases.
+6 to
–6 is displayed as the level is increased
or decreased.
7
Touch [c] or [d] to select the desired Q
factor.
Touch [c] or [d] until the desired Q factor ap-
pears in the display.
Wide2
— Wide1 — Narrow1 — Narrow2
Adjusting loudness
Loudness compensates for deficiencies in the
low- and high-sound ranges at low volume.
1
Touch [Loudness] on the
“AV Sound
Settings
” menu.
= For details, refer to Displaying the “AV
Customizing preferences
En
162
Chapter
25