Map coverage, Protecting the lcd panel and screen, Notes on internal memory – Pioneer AVIC-X9115BT User Manual

Page 26: Before removing the vehicle, Battery, Data subject to erasure 26, Resetting the microprocessor 26, Introduction

Map coverage

For more details about the map coverage of
this navigation system, refer to the information
on our website.

Protecting the LCD panel
and screen

p Do not allow direct sunlight to fall on the

LCD screen when this product is not being
used. Extended exposure to direct sunlight
can result in LCD screen malfunction due
to the resulting high temperatures.

p When using a cellular phone, keep the an-

tenna of the cellular phone away from the
LCD screen to prevent disruption of the
video in the form of spots, colored stripes,
etc.

p To protect the LCD screen from damage, be

sure to touch the touch panel keys with
your finger and gently touch the screen.

Notes on internal memory

Before removing the vehicle
battery

If the battery is disconnected or discharged,
the memory will be erased and must be repro-
gramed.
p Some data remains. Read Returning the na-

vigation system to the default or factory set-
tings before you operate this function.

= For more detailed information about the

items which would be erased, refer to
Returning the navigation system to the
default or factory settings on page 175.

Data subject to erasure

The information is erased by pressing the
RESET button or disconnecting the yellow lead
from the battery (or removing the battery it-
self). However, some items remain.

p Some data remains. Read Returning the na-

vigation system to the default or factory set-
tings before you operate this function.

= For more detailed information about the

items which would be erased, refer to
Returning the navigation system to the
default or factory settings on page 175.

Resetting the microprocessor

CAUTION

Pressing the

RESET button clears the settings for

the AV source without clearing all the navigation
function items. Please refer to the related section
before clearing.

= For more detailed information about the items

which would be erased, refer to Returning the
navigation system to the default or factory set-
tings on page 175.

The microprocessor must be reset under the
following conditions:

! Prior to using this product for the first time

after installation.

! If the product fails to operate properly.
! If there appear to be problems with the op-

eration of the system.

! When changing the combination of equip-

ment.

! When adding/removing additional pro-

ducts that connect to the navigation sys-
tem.

! If your vehicle position is shown on the

map with a significant positioning error.

Turn the ignition switch OFF.

Introduction

Chapter