Pioneer AVIC-X9115BT - Manual (Page 174)

Setting the anti-theft function
You can set a password for the navigation sys-
tem. If the back-up lead is cut or the
RESET
button is pressed after the password is set, the
navigation system prompts for the password
at the time of next boot up.
Setting the password
1 With the map displayed, press the
MENU button.
2 Touch [Settings] on the
“Top Menu”.
3 Touch Area1, followed by Area2, and
then touch and hold Area3.
Area1 Area2 Area3
4 Touch [Set Password].
The password setting screen appears.
5 Enter the password you want to set.
p 5 to 16 characters can be entered for a
password.
6 Touch [Done].
7 Reenter the password to confirm the
setting.
8 Touch [Done].
Password protection is applied.
p If you want to change the password cur-
rently set, enter the current password and
then enter the new one.
Entering the password
On the password input screen, you must enter
the current password. If you enter an incorrect
password three times, the screen is locked
and operations using touch panel keys are dis-
abled.
1 Enter the password.
2 Touch [Done].
The message
“Antitheft is being unlocked.
Do not switch off during the process.
” ap-
pears if you entered the correct password and
the navigation system is unlocking.
Deleting the password
The current password can be deleted.
1 With the map displayed, press the
MENU button.
2 Touch [Settings] on the
“Top Menu”.
3 Touch Area1, followed by Area2, and
then touch and hold Area3.
4 Touch [Clear password].
The password setting screen appears.
5 Enter the current password.
6 Touch [Done].
7 Touch [Yes].
The message for deletion appears and then
the current password is deleted.
Forgotten passwords
Contact the nearest authorized Pioneer Ser-
vice Station.
Other functions
En
174
Chapter
27