Panasonic BB-HCM381A - Manual (Page 98)

Operating Instructions
98
4. Set the time, and click [Next>].
Note
The timer works by an internal clock. Set the date and time before using timer
buffer/transfer (see page 77).
• Clicking [
• Clicking [Cancel] takes you back to the Trigger page without saving
changes.
5. Set the image settings, and click [Next>].
• Clicking [
• Clicking [Cancel] takes you back to the Trigger page without saving
changes.
Trigger • Selecting [Timer] enables the camera to buffer/transfer
images by timer.
• Selecting [Alarm 1 or 2] enables the camera to buffer/
transfer images by alarm signal.
• Selecting [Motion Detection] enables the camera to buffer/
transfer images when the motion is detected.
Setting Description
Day of the week • Check the box to enable the day. Uncheck the box to
disable it.
Active Time of
Trigger • To set a trigger time, check the time option and set a time
period. Check the [Always] option if you are not specifying
a time period.
Setting Description