Panasonic BB-HCM381A User Manual
Page 65
Operating Instructions
65
7.
Click [Restart].
8.
Set up your VPN router as shown below.
•
To use tunnel mode, you need to set up your VPN router.
Setting
Description
IPsec
•
Check the box to enable IPsec features. If you uncheck
the box, all IPsec features will be invalid.
Encoding strength
•
The encoding strength for IPsec can be selected. If you
select [Standard], DES or NULL is valid as an
algorithm, and the data will become easier to decrypt.
IKE Items
Settings
Phase 1
Authentication
Method
Pre-shared Key Method
ID
Specifies by address.
Mode
Main mode
*1
*1 The camera does not support aggressive mode.
Diffie-Hellman
MODP Group
Specifies 1 or 2.
Cipher Algorithm
Select from DES-CBC, 3DES-CBC or
AES-CBC (128, 192, 256 bits).
(Multiple selections are available.)
Message-Digest
Algorithm
HMAC-MD5, HMAC-SHA-1
Lifetime
Specifies by 28800 s (Byte setting is
not supported.)
Phase 2
Mode
Quick mode
PFS
Specifies either of Off, D-H Group 1
or D-H Group 2.
Cipher Algorithm
Select from DES-CBC, 3DES-CBC,
AES-CBC (128, 192, 256 bits) or
NULL. (Multiple selections are
available.)
Message-Digest
Algorithm
HMAC-MD5-96, HMAC-SHA-1-96
Lifetime
Specifies by 28800 s (Byte setting is
not supported.)