Panasonic BB-HCM381A User Manual
Page 101
Operating Instructions
101
When you set [FTP] for Transfer Method
Select [FTP], and click [Next>]. The following page is displayed.
•
Clicking [ • Clicking [Cancel] takes you back to the Trigger page without saving Setting Description Server IP *1 • If you set a server IP address, set 4 numbers (0—255) and 3 • You can set an IPv6 address. Port No. • Enter the number (1—65535). Usually set to 21. Login ID *2 • If your ISP requires a login ID, set it (0—63 characters). Password • If your ISP requires a password, set it (0—63 characters). Login • Select the login setting for the FTP server. If you set [One Upload File • Set a file name on the FTP server to receive the transferred
changes.
Address or
Host
Name
periods, such as "192.168.0.253". Note that "0.0.0.0" and
"255.255.255.255" are not available. Or set a host name (1—
255 characters).
Timing
Time] and the image buffer frequency value is set within 1
minute, the camera logs in to the server only once. This can
reduce transfer time.
Name
files. Enter 1—234 characters. Entering "\" creates directories
for a file. (E.g. NetworkCamera\image)