Panasonic BB-HCM381A - Manual (Page 46)

Operating Instructions
46
Basic
(1) Network (IPv4) Configures the IPv4 network settings to connect the
camera to the network (see page 48).
(2) Network (IPv6) Configures the IPv6 network settings to connect the
camera to the network (see page 53).
(3) IPsec Enables IPsec (Transport or Tunnel mode) (see page
57).
(4) UPnP Enables automatic port forwarding and creates a
shortcut to the camera (see page 67).
(5) DynamicDNS Registers with a DNS service, such as Viewnetcam.com
service (see page 70).
(6) Date and Time Sets the date and time, automatic time adjustment and
daylight saving time settings (see page 77).
(7) Camera Sets camera name, white balance, AC power source
frequency, automatic focus range, mounting type, pan/
tilt range, return to specified position, color night view,
and vertical resolution settings (see page 80).
(8) Audio Sets output, volume, PC audio input timeout, input,
camera microphone sensitivity and mute during pan/tilt
settings (see page 86).
Account
(9) Administrator
*1
Sets authentication and administrator security (user
name and password) (see page 88).
(10)
General User
*1 Sets general user security (user name and password)
and access levels (see page 93).
Buffer/Transfer
(11) Trigger Sets image buffer or transfer by timer, alarm, or motion
detection (see page 97, page 107, or page 119).
(12) Motion
Detection Sets the threshold and sensitivity for motion detection
(see page 133).
(13) Alarm Log Sets the information required to send log notifications by
e-mail (see page 137).
Advanced
(14) Image Display Sets the resolution, image quality and refresh interval of
the Single Camera and Multi-Camera page, as well as
time stamp setting, language and banner (see page
145).