Panasonic BB-HCM381A - Manual (Page 138)

Operating Instructions
138
Note
• When the settings are saved, the number of new alarm logs becomes 0.
• The camera works only with an SMTP (Simple Mail Transfer Protocol)
server. It does not work with mail servers like "Hotmail" that use a web
browser.
Setting Description
A setup of
operation • Alarm log operation can be set here.
Time • Set the day of the week and time to send alarm logs via E-
mail.
SMTP Server IP
Address or Host
Name
*1
• If you set a server IP address, set 4 numbers (0—255) and
3 periods such as "192.168.0.253". Note that "0.0.0.0" and
"255.255.255.255" are not available. Or set a host name
(1—255 characters).
• You can set an IPv6 address.
Port No. • Enter the number (1—65535). Usually set to 25.
Reply E-mail
Address
*2
• Set the sender's E-mail address. We recommend you to
set the administrator's E-mail address.
Destination E-
mail Address
*2
1—3
• Set the destination E-mail address (up to 3).
Subject
*2 • Enter a subject with ASCII characters (see page 190) or
characters from other languages (0—44 characters for a
1-byte character and 0—22 characters for a 2-byte
character).