Predeployment overview, Figure 3-1, The predeployment process – Polycom ViewStation EX4000 User Manual
Page 58
Integrators’ Reference Manual for ViewStation EX, ViewStation FX, and VS4000
48
www.polycom.com
Predeployment Overview
The diagram below gives an overview of the tasks involved in
predeployment planning.
Figure 3-1.
The Predeployment Process
Document the network:
LANs
Subnets
WAN links
Determine network capacity
requirements
Specify call processing
considerations:
Define CPS architecture
Identify gatekeepers
Specify the default
gatekeeper for each endpoint
or group of endpoints
Specify direct or routed calls
as default mode
Create the dial plan:
Define service plan
Define routing tables
Define policies
Define zones
Define the entity addressing
scheme
Verify appropriateness of the
hardware that will host Polycom
Office software
Start deployment