Paxar 545 - Manual (Page 9)

Users Manual Model 545™ Location / Power Requirements • 7
AC Power Line
PAXAR requires that the electric service be 10 Amps @ 115VAC or 10 Amps @
230VAC. This will allow the computer and any additional support or service
equipment to be plugged into the same service.
Any electrical service which is supplying a PAXAR printer or peripheral equipment
connected to a PAXAR printer should follow standard electrical code practices
including proper grounding and neutral requirements.
The PAXAR printer was designed to operate in an industrial setting for extended
periods of time; however, the printer is controlled by a microprocessor which is very
sensitive to brownouts or power spikes. For this reason as well as the minimum
recommended current supply, PAXAR recommends that a separate “clean” service
be installed or reserved for the exclusive use of the PAXAR printer and it’s
peripherals.