beautypg.com

Fabric advance – Paxar 545 User Manual

Page 71

background image

Users Manual Model 545™

Electrical Trouble Shooting

69

Fabric Advance

Problem

Probable Cause

Corrective Action

Fabric does not advance

when the start button is
depressed.

1) No batches to be printed.

1) Download batch (if batch downloaded uses the

same format as a previously downloaded batch
the printer with start automatically).

2) An interlock condition exists.

1) Determine the number and type of interlock(s)

by reading the front panel display. As each is
corrected the number of errors will decrease
(Example "Error 910 Feed Open" close feed).

3) Feed roller(s) not gripping the

fabric.

1) Clean the feed rollers in the active unwind and

the feed module.

4) Feed rollers bound.

1) With power off - check that all rollers turn

freely.

5) Fabric bound.

1) With the feed open and the pressure roller held

open in the active unwind - check that the
fabric will pull through the printer with little to
no resistance.

6) Feed motor(s) unplugged or

faulty.

1) Check the feed motor cable(s) and or replace

the active unwind or feed motor.

7) Thermal Control Board

unplugged or faulty.

1) Check Thermal Control Board / AT board

connection and or replace Thermal Control
Board.

8) Finishing Interface Board

unplugged or faulty.

1) Check Finishing Interface Board connections

and or replace Finishing Interface Board.