Panasonic WJ-SX650 User Manual

Page 77

Programs the preset position.

Enter the number. (Numeric
buttons)
→ [SHIFT] + [PGM PRESET]

Enter the number. (Numeric
buttons)
→ [SHIFT] +
[PROGRAM PRESET]

Moves to the preset position.

Enter the number. (Numeric
buttons)

→ [PRESET]

Enter the number. (Numeric
buttons)

→ [CALL PRESET]

WV-CU950/650, WV-
CU360C/CJ:
Without numeric entry, the
camera will move to the home
position.

Camera setup menu

Open "Camera Setup" menu.
→

WV-CU950/650, WV-
CU360C/CJ:
• Refer to p.

Operation list

of WV-CU950/650 and WV-
CU360C/CJ for setup menu
operations.

• Moves the cursor: Joystick

CDAB

• To perform the setting of

panning/tilting, lens iris, lens
focus, or zooming in the
setup menu, control the
camera while holding down
the SHIFT button.

• Opens the camera setup

• Closes the camera setup

[F2]

[SHIFT] + [CAM SETUP]

• Opens the special menu. /

Resets the camera setting.

• Resets all the camera set-

tings.

[F3]

[F4]

[RESET]

[SHIFT] + [ALL RESET]

Pan/Tilt control

Joystick CDAB

WV-CU950/650, WV-
CU360C/CJ:
The camera will pan and tilt
according to the direction of
joystick movement.

WV-CU950/650, WV-
CU360C/CJ:
Lens iris will keep opening up
while this button is held down.

Iris control
• Opens the lens iris.

[IRIS OPEN]

[F1]

[SHIFT] + [CAM SETUP]

• Closes the lens iris.

[IRIS CLOSE]

WV-CU950/650, WV-
CU360C/CJ:
Lens iris will keep closing
down while this button is held
down.

• Resets the lens iris to the

default status.

[A]

[IRIS OPEN] + [IRIS CLOSE]

WV-CU950/650:
You can assign another func-
tion to this button.
The setting is performed in
"Controller" – "Key
Assignment" of WJ-SX650
Series Administrator Console.

Function

WV-CU950/650

WV-CU360C/CJ

Note

Camera control