Panasonic WJ-SX650 - Manual (Page 39)

39
5. Perform the RS-485 camera settings.
CAM001 to 150: If you use RS-485 cameras, select
desired parameters for the RS-485 ports and cam-
era unit numbers.
"System" – "RS485 Camera"
RS485 CAMERA (Refer to p.
92 .)
6. Perform the settings of cameras supplying video input
signal to recorders.
LCN Setting (CAM 1 to 16): LCN settings for cameras
supplying loop-thru video output signal to
recorders. (In this example, maintain the factory
default.)
Note: Change these parameters when you have
changed the LCN settings in Step 3 or loop-thru
connections. (Refer to p.
65 .)
"System" – "Recorder"
Not available
7. Perform the camera title settings.
CAM001 to 160: Enter desired camera titles.
"System" – "Camera Title"
Not available
8. Set the current time and date.
"Display" – "Display"
TIME&DATE (Refer to p.
85 .)