Setting the time/date automatically – Philips DVDR 80 User Manual

Page 42

Setting the time/date automatically

This function uses the information sent via the local PBS channel to automatically set the
time/date. For this reason, you must enter the PBS channel that sends this additional information.
When the DVD Recorder chooses a wrong PBS channel or the displayed time/date is wrong,
you must manually set the date/time (see section 'Manually setting the time & date').

Attention!
If data from the GUIDE PLus+

system were loaded, you can not change the clock/date because

this information was taken from the GUIDE Plus+

system. Therefore you can not select this

function.

Press SYSTEM-MENU on the remote control. The menu bar
will appear.

Select '

' using

D or C .

Select line 'Installation' using CH-

B or ACH+ and confirm

with

C .

Select line 'Time/Date' using CH-

B or ACH+ and confirm

with

C .

Select 'Automatic' with CH-

B or ACH+ and confirm with

C .

a'Not allowed'will appear on the TV screen

b The time/date will automatically be taken from the EPG information.

Therefore you can not set the time/date manually.

Problem

Time/Date

Automatic

PBS Channel

Auto.

Daylight Saving

Off

Time Zone

Auto.

To exit press
SYSTEM MENU

Select the corresponding line with CH-

B or ACH+ .

Select the channel which sends the time/date information in the
line 'PBS Channel' and confirm with OK . The DVD Recorder
will check whether or not the information transfer is possible.

a'Clock not set, check channel'will appear on the TV screen

b No time/date data can be received from this TV channel.

Select a different channel or 'Auto.' in line 'PBS Channel'.

Problem

Select one of the following settings in line 'Daylight Saving':
'On': The time set corresponds to summer time (summer time
activated)
'Off': The time set corresponds to the winter time (summer time
is off)

Installing your DVD Recorder

This manual is related to the following products:

DVDR800