Philips DVDR 80 - Manual (Page 32)

20
Connecting a cable box with Cinch or
S video cable
You can connect a cable box to the S-VIDEO IN or Video in and the IN L AUDIO R jacks
on the recorder. Switching between jack S-VIDEO IN and Video in is done automatically. In
case both jacks are occupied, the signal at jack S-VIDEO IN is given priority.
The antenna cable should also be connected to the cable box and the DVD-Recorder as shown
above.
Connect the DVD-Recorder directly with your TV-set (Cable from the output jacks S-VIDEO
OUT or OUT VIDEO (CVBS) directly to the TV set). If there is a video recorder or another
device in between, there can be distortions in the TV pictures from the built in 'copy protection
system'.
Connecting a Cable Box only with the
antenna cable
•) The DVD-Recorder have to be directly connected to the TV set. If there are other devices
(video recorder, decoder, satellite receiver,...) in between, there can be distortions in the TV
pictures from the built in 'copy protection system'.
•) The Cable Box have to be connected before the DVD-Recorder (Cable Box - DVD-Recorder -
TV set). On the jack TV OUT only the TV have to be connected.
The antenna cable should also be connected to the Cable Box and the DVD-Recorder as shown
above.
Connecting additional devices