Philips DVDR 80 - Manual (Page 40)

28
9 To save your channel selections, press OK .
10 To remove the menus, press SYSTEM-MENU repeatedly.
Setting the language
You can select the language for subtitles and audio for DVD playback. Please observe that with
some DVDs, you can change the audio language and/or subtitle language only via the DVD disc
menu.
Moreover, when recording the sound of a TV channel, you can switch between stereo and an
additional language (SAP - Secondary Audio Program). See the following section on 'Switching
audio recording (stereo, SAP)'.
Plus, you have the option of setting one of the displayed languages for the recorder's on-screen
menu. However, the DVD Recorder will only display text in English, regardless of this setting.
1 Turn on your TV. If required, select the channel number for the
DVD Recorder (channel 3 or 4).
2 Turn on the DVD Recorder by pressing STANDBY-ON m .
3 Press SYSTEM-MENU on the remote control. The menu bar
will appear.
4 Select ' A ' using D or C .
5 Select the line 'Language' using CH- B or ACH+ and confirm
with C .
Language
Playback audio English
Recording audio Stereo
Subtitle English
Menu English
6 Select the corresponding line and confirm with C .
Which settings can I choose?
' Playback audio' : language of the playback (audio language)
' Recording audio' : Type of audio recording 'Stereo' or 'SAP'
' Subtitle' : Subtitle language
' Menu': Language of the OSD menu
Tip
7 Select the corresponding setting with CH- B or ACH+ and
confirm with OK .
8 To end, press SYSTEM-MENU .
Installing your DVD Recorder