Philips DVDR 80 - Manual (Page 10)

Output jacks (OUT 1 480p/480i)
OUT AUDIO LR Analog audio output (red/white jack): Connection for an additional
device. Audio output for component video/progressive scan
OUT COMPONENT
VIDEO
Component video output (red/blue/green jack): Connection for
an additional device with component video/progressive scan output
Output jacks (DIGITAL AUDIO OUT)
COAX OUT Coaxial digital audio output:
OPTICAL AUDIO
OUT
Optical digital audio output:
Output jack (G LINK)
G-LINK Connection of the IR Blaster(IR extender) for a cable box.
WARNING
This jack contains a 'DEMO PIN'. This enables a demonstration of the
GUIDE Plus+
® system to be shown automatically with stored data.
Remove the Demo Pin to disable the Retail Demo feature.
The symbols on your DVD Recorder
display
The following symbols may appear on your DVD Recorder display:
Multifunction display/text line
•) Clock
•) Disc/Title play time
•) OTR time
•) Title name
•) Display of the TV channel number / playing time / function.
•) Display of information, warnings
IIIIIIIIIIIIIII Disc bar: Displays the current position on the disc (disc pointer).
Play/Record: single flashing segment at the current position.
Pause: flashing segment on both sides of the current position.
Stop: flashing segment at the current position.
TIMER A recording (Timer) has been programmed
TV Modulator is switched off. The antenna signal (RF signal) is only
connected to the TV when the modulator is switched off.
PRO Component Video output set to 'Progressive Scan.' If this is not
displayed, the Component Video output is set to 'Interlaced.'
o((( Remote control command has been sent