Polycom TransTalk 9000-Series - Manual (Page 341)

Remote Administration Password (#730) —Release 3.0
or Later
5-231
3. Enter or change the password by entering the two-digit character codes
found in Extension Name Display, Table 5.1.
4. To save the password, press e . The bottom line of the display shows
the password as it has been entered.
5. Select another procedure or exit programming mode.
6. To remove an existing password, repeat steps 1 and 2 and press r .
7. Select another procedure or exit programming mode.
Using
For more information about administering your system remotely from a PC, see
the
Getting Started Guide which accompanies the PARTNER ACS Release 3.0
Remote Administration Software.