Polycom TransTalk 9000-Series - Manual (Page 113)

Overview
5-3
Table 5-2.
Dial-Code Feature 1
F01 Do Not Disturb
2
F15 VMS Cover 2
F02 Exclusive Hold 2 F16 Caller ID Name Display 2
F03 Recall F17 Caller ID Inspect 2
F04 Save Number Redial F18 Voice Interrupt On Busy Talk-Back 2
F05 Last Number Redial F19 Background Music 2
F06 Conference Drop 2 F20, XX,XX Call Coverage 3
F07 Privacy 2 F21 Station Lock
F08 Touch-Tone Enable F22 Station Unlock 2
F09 XX Message Light On F23 Caller ID Call Logging and Dialing 2
F10 XX Message Light Off F24 Record-a-Call 2, 4
F11, XX,XX Call Forwarding/Call Follow-Me F25 Call Screening 2, 4
F12 Account Code Entry 2 F41 Contact Closure 1
F13 XX Manual Signaling (beep or ring) F42 Contact Closure 2
F13* XX Manual Signaling (voice signal) F59 System Release Status 2
F14 Voice Mailbox Transfer 2
Table 5-2a.
Intercom Dial-Code Features 1
I 6 XX Call Pickup
I 66 G Group Pickup
I 68 LL Direct Line Pickup—Active Line
I 70 Loudspeaker Paging
I *70 Simultaneous Paging
I 7 G Group Calling—Ring
I *7G Group Calling—Page
I 77 G Group Hunting—Ring
I *77G Group Hunting—Voice Signal
I 8 LL Direct Line Pickup—Idle Line
I 891 Automatic System Answer Record/Playback 3
I 892 Direct Extension Dial Record/Playback 3
1. A 5-Slot carrier can provide a maximum of 40 extensions or a maximum of 19 lines; a 2-Slot carrier can provide
a maximum of 16 extensions or a maximum of 7 lines. References in this guide are to 40 extensions and to 19
lines, even though no system can be configured with both maximums simultaneously. Your system does not
have to be configured for the maximum of either extensions or lines.
F represents the
f button I represents the i button; XX represents a system extension number; G
represents a single-digit group number; and LL represents a system line number.
2. Available only on system phones
3. PARTNER ACS Release 2.0 or later
4. PARTNER ACS Release 3.0 or later