Programming – Polycom TransTalk 9000-Series User Manual
Page 331
Pool Line Assignment (#207)—Release 2.0 or Later
5-221
Programming
(See Figure 2-3 on page 2-22 for the location of special programming buttons such
as
s
and
e
on system phones.)
To change the assignment of lines to pools:
1. Press
f 0 0 s s # 2 0 7
.
2. Enter the first line to be programmed. For example, to program line 8,
press
0 8
. A display similar to the following appears:
Lines to Pools L08
2 Pool 880
3. Enter the desired value (1–5)—see “Valid Entries” on the previous page.
4. To program another line, press
n
or
p
until the line number
shows on the display. Then repeat Step 3.
5. Select another procedure or exit programming mode.