Perle Systems 833IS - Manual (Page 70)

Using the Manager Main Screen
54 Perle 833IS User Guide
Reset the Perle 833IS
Reset the Perle 833IS. Any sessions handled by the Server will be terminated.
Set Date and Time
Set the system date and time on the Perle 833IS.
Set Lock Front Panel
Enables/Disables the Front Panel Access Lock. If enabled, the password must be
entered at the Front Panel to gain access.
Download Firmware
Download a new version of operating code (Firmware) to the Perle 833IS.
Set to Factory Mode
Delete the current configuration and sets the server to Factory Default Mode.
Statistics This option is available on the Statistics menu:
Get Statistics
Display the System Statistics window. The System Statistics window gives
information about the Perle 833IS to which the Manager is connected.
Event Log The following options appear under the Event Log menu:
Get Event Log
This will get the event log file from the connected Perle 833IS and display the data
in a scrollable window. The columns in the table are date, time, event and user name
if applicable.
Change Log Filter
This will lets the user select any of the event types recorded by the 833IS. Only those
events will be recorded.
Clear Event Log
This will clear all the data from the connected server’s log file.