Perle Systems 833IS - Manual (Page 30)

Cable Planning and Requirements
14 Perle 833IS User Guide
Cable Planning and Requirements
LAN Cabling Depending on the type of system card inserted into the 833IS, the unit can support
either an Ethernet or a Token Ring interface. The type of LAN cabling you will need
will depend on the following factors:
■ The type of LAN.
■ The type of hub (Ethernet) or Media Access Unit (Token Ring).
■ The type of cabling used in the existing LAN network.
Ethernet The following physical interfaces are available for Ethernet:
■ 10Base-T/100Base-TX - uses an RJ-45 connector
▲ Ethernet/LAN Cable Connection
10 Base-T/
100 Base-TX