Perle Systems 833IS - Manual (Page 209)

Chapter 9: Configuring the Server
Perle 833IS User Guide 193
The Logging-Syslog screen is as follows:
Enable Syslog
Click on the box to enable the sending of Event Log messages to the configured
Syslog Servers.
Syslog Servers
IP Address 1 - 4
Enter the IP address of the Syslog Servers that will receive the logging messages.
Error Level
Event Log Messages are assigned an error level (0 - 7), that indicates the severity of
the event.
The levels are as follows:
0: Emergencies - System unusable
1: Alerts - Immediate action needed
2: Critical
3: Errors
4: Warnings
5: Notifications - Normal but significant condition
6: Informational - Informational messages only