Perle Systems 833IS User Manual
Page 210
SNMP
194
Perle 833IS User Guide
7: Debugging - For Perle use only
Selecting a certain error level will cause all events of that Error Level and all events
with an error level lower than the one selected to be sent to the Syslog Server.
Event Log
The Logging - Event Log screen is as follows:
Enable Event Log
Click on the box to enable the storing of Event Log messages to an internal Event
Log in NVRAM.
This Event Log is circular in nature, so newer messages overwrite older messages
after the Event Log is filled.
Error Level
The error levels are as follows:
0: Emergencies - System unusable
1: Alerts - Immediate action needed
2: Critical
3: Errors
4: Warnings
5: Notifications - Normal but significant condition