Perle Systems 833IS - Manual (Page 102)

Configuring the Perle DSP Modem Interface
86 Perle 833IS User Guide
Configuring the Perle DSP Modem Interface
No configuration is necessary for the modems to operate in the 833IS. The modem
configuration screen allows you to:
■ Disable a modem on the card.
■ Change the name of the modem from the default name.
■ Customize the modem initialization string.
The following parameters can be set:
Enable
Check to enable the modem. If you suspect that there is a problem with a particular
modem, you can disable it by clearing the check box. The modem will then be
removed from the modem pool.
Group
This is a display only field. This field will be checked if you have defined a group
that includes this modem. A modem assigned to a group has the dial in, dial out and
callback attributes defined by the group. For more information, see “Group Settings”
on page 182.