Electrical requirements, Irements. see “electrical requirements – Perle Systems 833IS User Manual
Page 28
Electrical Requirements
12
Perle 833IS User Guide
then,
✎__ Order the ISDN BRI lines required.
✎__ Order the required cabling. See “Cable Planning and Requirements” on
✎__ Ensure that the electrical outlets have been installed and are properly
grounded.
Electrical Requirements
The 833IS should not share electrical circuits with equipment that can cause
electrical noise and interference.
For your safety, you must connect equipment only to a properly wired and grounded
outlet. An improperly wired outlet can place hazardous voltage on the accessible
metal parts of the unit.
Electrical Specification
Voltage Selector Switch
115
230
Voltage
100 - 125 VAC
200 - 240 VAC
Phases
1
1
Current
.5 A (Maximum)
.25 A (Maximum)
Power
62.5 W (Maximum)
60 W (Maximum)