Lowrance electronic 5200C - Manual (Page 75)

69
2. Press
WPT
| → to
D
ELETE
W
AYPOINT
|
ENT
| ← to
Y
ES
|
ENT
. To return to
the previous page and clear the cursor, press
EXIT
.
To delete all waypoints at one time: press
MENU
|
MENU
| ↓ to
S
YSTEM
S
ETUP
|
ENT
| ↓ to
D
ELETE
A
LL
M
Y
W
AYPOINTS
|
ENT
| ← to
Y
ES
|
ENT
. To return
to the previous page, press
EXIT
|
EXIT
.
Edit a Waypoint
Waypoint Name
To edit waypoint name:
1. Press
WPT
|
ENT
|
ENT
|
ENT
| ↓ to waypoint name|
ENT
| ↓ to
E
DIT
W
AY-
POINT
|
ENT
|
ENT
.
2. Press ↑ or ↓ to change the first character, then press → to the next
character and repeat until the name is correct. Press
ENT
then
EXIT
|
EXIT
|
EXIT
|
EXIT
to return to the previous page display.
Waypoint Symbol
To edit waypoint symbol:
1. Press
WPT
|
ENT
|
ENT
|
ENT
| ↓ to waypoint name|
ENT
| ↓ to
E
DIT
W
AY-
POINT
|
ENT
| ↓ to
C
HOOSE
S
YMBOL
|
ENT
.
2. Use arrow keys to select desired symbol and press
ENT
. To return to
the previous page, press
EXIT
|
EXIT
|
EXIT
|
EXIT
.
Waypoint Position
To edit waypoint position:
1. Press
WPT
|
ENT
|
ENT
|
ENT
| ↓ to waypoint name|
ENT
| ↓ to
E
DIT
W
AY-
POINT
|
ENT
.
2. Latitude: press → to
L
ATITUDE
|
ENT
. Press ↑ or ↓ to change the first
character, then press → to the next character and repeat until the lati-
tude is correct. Press
EXIT
.
3. Longitude: press ↓ to
L
ONGITUDE
|
ENT
. Press ↑ or ↓ to change the first
character, then press → to the next character and repeat until the lon-
gitude is correct. Press
EXIT
.
4. When latitude and longitude are correct, return to the previous page:
press
EXIT
|
EXIT
|
EXIT
|
EXIT
.
Selecting a Waypoint
To select a waypoint on the map (for navigating to, for editing, etc.,) use
the arrow keys and center the cursor over the waypoint. A highlighted
halo will appear around the waypoint.
Set a Waypoint by Average Position
This feature sets a waypoint at the current position after taking several
position readings and averaging them.