Lowrance electronic 5200C - Manual (Page 59)

53
Navigate a trail menu sequence: Fig. 1, My Trails command. Fig. 2,
Trails Menu. Fig. 3, Edit Trail Menu. Fig. 4, Edit Route Menu for Trail
3. A trail is always converted to a "route" when you navigate the trail.
On the Map Page, the trail you are navigating is represented by a dot-
ted line that alternates with a flashing solid line. The Navigation Page
will also show the navigated trail as a dotted line. The bearing arrow
on the compass rose points to the next waypoint on the trail.
As you travel, the arrival alarm will go off when you near a trail way-
point. The bearing arrow on the compass rose will swing around and
point to the next trail waypoint. Press
EXIT
to clear the alarm.
Figure 4.
Figure 1.
Figure 3.
Figure 2.