Navigate back to mob waypoint, Navigate to cursor position on map – Lowrance electronic 5200C User Manual

Page 53

To activate it, press the

ZOUT

and

ZIN

keys at the same time. Your posi-

tion at the time these keys are pressed is used as the man overboard

position.
Caution:

Saving a new "Man Overboard" waypoint will overwrite and
erase the previous "Man Overboard" waypoint.

Navigate Back to MOB Waypoint

Find your way back to the accident position with the Navigation Page

or Map Page. When MOB is activated, the Navigation Page automati-

cally shows the compass rose with its bearing arrow pointing toward

the man overboard position, and the destination name says "Going To

Man Overboard." The Map Page displays a Man Overboard waypoint,

represented by a human figure, and the steering arrow points where to

steer to reach that position.

Navigating to Man Overboard: Man Overboard Activated message, left,

Navigation Page, center, Map Page, right. The MOB is to the starboard

of the vessel; the GPS shows which direction to steer for the rescue.

The man overboard position is also stored in the waypoint list for fu-

ture reference. It can be edited the same as any other waypoint. This

prevents the inadvertent loss of the current Man Overboard position.
To cancel navigation to MOB, press

MENU

↓ to

ANCEL

AVIGA-

TION

ENT

← to

ENT

. The unit stops showing navigation informa-

tion.

Navigate to Cursor Position on Map

The

URSOR

command navigates to the current cursor position on

the map. It's a quick way to navigate to anything you can see on-screen.
1. Use the cursor (controlled by the arrow keys) with the zoom in and

zoom out keys to maneuver around the map until you find a location

you want to go to.