Lowrance electronic 5200C - Manual (Page 55)

49
To stop navigating to the cursor, use the Cancel Navigation command:
press
MENU
|
MENU
| ↓ to
C
ANCEL
N
AVIGATION
|
ENT
| ← to
Y
ES
|
ENT
. The unit
stops showing navigation information.
Navigate to a Point of Interest
For POIs that are in view on the map, you can use the Navigate to Cur-
sor command above; use the cursor to select the POI. The other method
involves searching for POIs with the Find Waypoint command,
launched with the
WPT
key.
After you have looked up an item with the Find Waypoint command,
use
↑ or ↓ to make sure the
G
O
T
O
W
AYPOINT
command is highlighted at
the top of the screen, then press
ENT
. The unit begins showing naviga-
tion information to the item.
To cancel navigation, press
MENU
|
MENU
| ↓ to
C
ANCEL
N
AVIGATION
|
ENT
| ←
to
Y
ES
|
ENT
. The unit stops showing navigation information.
Creating and Saving a Trail
A trail, or plot trail, is a string of position points plotted by the unit as
you travel. It's a travel history, a record of the path you have taken.
Trails are useful for repeating a journey along the same track. They are
particularly handy when you are trying to retrace your trip and go back
the way you came. On the screen, trails are represented by a solid line
extending from the back of the current position arrow.
The unit is set at the factory to automatically create and record a trail
while the unit is turned on. The unit will continue recording the trail
until the length reaches the maximum trail point setting. Default is
2,000, but the unit can record trails 9,999 points long. When the point
limit is reached, the unit begins recording the trail over itself.
By default, the trail flashes once a second, making it easier to see against
the background map. With the default auto setting, this unit creates a
trail by placing a dot (trail point) on the screen every time you change di-
rections. The methods used for creating a trail and the trail update rate
can be adjusted or turned off. See Sec. 5 for Trail Options.
To preserve a trail from point A to point B, you must "turn off" the trail
by making it inactive before heading to point C or even back to point A.
When the current trail is set inactive, the unit automatically creates
and begins recording a new trail.