Lowrance electronic 5200C - Manual (Page 148)

142
Reset Trim Calibration
If you are not satisfied with your engine trim calibration, you can reset
engine trim calibration from the Suzuki Engine Interface Advanced
Options menu.
1. Press
MENU
|
MENU
, select
NMEA 2000
and press
ENT
.
2. Choose
B
US
S
ETUP
and press
ENT
. Select the Suzuki Engine Interface
connected to the desired engine and press
ENT
.
3. Highlight
A
DVANCED
O
PTIONS
and press
ENT
. Select Reset
T
RIM
C
ALIBRA-
TION
and press
ENT
. The following message will appear: Do you wish to
re-calibrate the device?
4. Highlight
Y
ES
and press
ENT
. Press
EXIT
repeatedly to get back to the
main display.
Bennett Trim Tabs Calibration
Trim Tabs will be calibrated through their Device Configuration menu.
To calibrate Trim Tabs:
1. Press
MENU
|
MENU
, select
B
US
S
ETUP
and press
ENT
. A list of network
devices will appear.
2. Select
B
ENNETT
T
RIM
T
ABS
from the list and press
ENT
, which will open
the Trim Tab Device Configuration menu.
3. Highlight
C
ALIBRATE
and press
ENT
. The Device Calibration window
will appear with a list of calibration instructions.
4. Select
S
TART
C
ALIBRATION
and press
ENT
. The following message will
appear: Please fully raise Trim Tabs.
5. After fully raising the trims tabs, press
ENT
. The following message
will appear: Please fully lower trim tabs.
6. After fully lowering the trim tabs, press
ENT
. A Calibration Complete
message will appear. Press
ENT
. Press
EXIT
repeatedly to return to the
main display.
To Reset Calibration:
1. Press
MENU
|
MENU
, select
NMEA 2000
and press
ENT
.
2. Highlight
F
UEL
M
ANAGEMENT
and press
ENT
.
3. Highlight
E
NGINE
S
ELECT
and press
ENT
. The Engine Select menu will
appear with up to four options: All Engines, Port, Center and Star-
board. Selecting All Engines will reset calibration for all engines back
to factory defaults.
4. Select All Engines or the engine connected to the desired device and
press
ENT
.