Lexmark 2300 Series - Manual (Page 51)

51
Setting up a network printer with the
point-and-print method
With this method, the printer driver is partially installed on each of the client
computers networked to the host computer. The host computer controls
driver changes and handles print job processing.
1 Follow the instructions on the Lexmark 2300 Series Setup sheet to
install hardware and software on the host computer.
2 From the host computer, click Start Æ Settings Æ Printers or
Printers and Faxes.
3 Right-click the Lexmark 2300 Series icon.
4 Click Sharing.
5 Click Shared As, and then type a distinctive name for the
All-In-One.
6 Click OK.
7 From the client computer, double-click Network Neighborhood,
My Network Places, or My Network.
8 Find the host name of the server, and look for the shared name you
assigned to the All-In-One.
9 Right-click the All-In-One icon, and then select Open, Install, or
Connect.