Lexmark 2300 Series - Manual (Page 50)

50
Setting up a network printer with the peer-to-peer
method
With this method, the printer driver is fully installed on each client
computer. Network clients retain control of driver modifications. The client
computer handles the print job processing.
1 Follow the instructions on the Lexmark 2300 Series Setup sheet to
install the hardware and software on the host computer.
2 From the host computer, Click Start Æ Settings Æ Control Panel.
3 Select Network and Dial-up Connections.
4 Select the network connection.
5 Click Properties.
6 Make sure a check mark appears next to File and Printer Sharing
for Microsoft Networks.
If no check mark appears, click the box next to File and Printer
Sharing for Microsoft Networks.
7 Click OK.
8 From the client computer, insert the All-In-One software CD.
9 Follow the instructions on the client computer screen.
10 Select USB cable when asked how the All-In-One is connected to
the computer.
11 Select Peer to Peer when asked how the All-In-One is connected to
the network.
12 Repeat steps 8 through 11 for each of the client computers.