LSI MegaRAID SCSI 320-2 RAID Controller Series 518 - Manual (Page 45)

MegaRAID SCSI 320-2 Hardware Guide 4-1
Copyright © 2002 by LSI Logic Corporation. All rights reserved.
Chapter 4
Features
This chapter explains the features of the MegaRAID SCSI 320-2. It
contains the following sections:
•
Section 4.1, “SMART Technology”
•
Section 4.2, “Configuration on Disk”
•
Section 4.3, “Configuration Features”
•
Section 4.4, “Array Performance Features”
•
Section 4.5, “RAID Management Features”
•
Section 4.6, “Fault Tolerance Features”
•
Section 4.7, “Software Utilities”
•
Section 4.8, “Operating System Software Drivers”
•
Section 4.9, “MegaRAID SCSI 320-2 Specifications”
•
Section 4.10, “MegaRAID Components”
•
Section 4.11, “RAID Management”
•
Section 4.12, “Compatibility”
MegaRAID is a family of high performance intelligent PCI-to-SCSI host
adapters with RAID control capabilities. The MegaRAID SCSI 320-2 has
two SCSI channels that support Ultra320 and Wide SCSI with data
transfer rates of up to 320 Mbytes/s. Each SCSI channel supports up to
15 Wide devices and up to seven non-Wide devices.
MegaRAID SCSI 320-2 features include:
•
Remote configuration and array management through MegaRAID
WebBIOS
•
High-performance I/O migration path while preserving existing PCI-
SCSI software