LSI MegaRAID SCSI 320-2 RAID Controller Series 518 - Manual (Page 18)

xviii Contents
Copyright © 2002 by LSI Logic Corporation. All rights reserved.
6.2.1 Step 1: Unpack 6-3
6.2.2 Step 2: Power Down 6-3
6.2.3 Step 3: Install Cache Memory 6-4
6.2.4 Step 4: Check Jumper Settings 6-5
6.2.5 Step 5: Set Termination 6-8
6.2.6 Step 6 Set SCSI Terminator Power 6-13
6.2.7 Step 7: Install Battery Pack (Optional) 6-13
6.2.8 Step 8: Install MegaRAID SCSI 320-2 6-16
6.2.9 Step 9: Connect SCSI Devices 6-17
6.2.10 Step 10: Set Target IDs 6-18
6.2.11 Step 11: Power Up 6-20
6.2.12 Step 12: Run the MegaRAID BIOS Configuration
Utility
6-20
6.2.13 Step 13: Install the Operating System Driver 6-21
6.3 Summary 6-21
Chapter 7
Installing and Configuring Clusters
7.1 Overview 7-1
7.2 Benefits of Clusters 7-2
7.3 Installation and Configuration 7-2
7.3.1 Driver Installation Instructions under Microsoft Windows
2000 Advanced Server
7-3
7.3.2 Network Requirements 7-4
7.3.3 Shared Disk Requirements 7-5
7.4 Cluster Installation 7-5
7.4.1 Installation Overview 7-5
7.4.2 Installing Microsoft Windows 2000 7-7
7.4.3 Setting Up Networks 7-7
7.4.4 Configuring the Cluster Node Network Adapter 7-8
7.4.5 Setting Up the First Node in Your Cluster 7-9
7.4.6 Configuring the Public Network Adapter 7-10
7.4.7 Verifying Connectivity and Name Resolution 7-11
7.4.8 Verifying Domain Membership 7-12
7.4.9 Setting Up a Cluster User Account 7-12
7.4.10 Setting Up Shared Disks 7-13
7.4.11 Configuring Shared Disks 7-14
7.4.12 Assigning Drive Letters 7-15