LSI MegaRAID SCSI 320-2 RAID Controller Series 518 - Manual (Page 114)

7-20 Installing and Configuring Clusters
Copyright © 2002 by LSI Logic Corporation. All rights reserved.
The order in which the Cluster Service Configuration Wizard presents
these networks can vary. In this example, the public network is presented
first.
Follow these steps to configure the clustered disks:
1. The Add or Remove Managed Disks dialog box specifies disks on
the shared SCSI bus that will be used by Cluster Service. Add or
remove disks as necessary, then click on Next.
The following screen displays.