Lanier JP1030 - Manual (Page 65)

Color Printing Using the Optional Color Drum
53
2
DDDD
Remove the prints from the paper
delivery tray and place them on
the paper feed tray again as
shown in the illustration.
EEEE
Change the drum unit.
Reference
See p.50 “Changing the Color
Drum Unit”.
FFFF
Place the second original, and
then press the
{{{{Start}}}} key.
Printing starts automatically after
trial print is delivered.
Note
❒ If you want to check the print
image, press the
{{{{Auto Cycle}}}}
key to turn off Auto Cycle mode
before pressing the
{{{{Start}}}} key.
For details, see p.14 “When
Auto Cycle is off”.
PinkGold-F_V4_FM.book Page 53 Tuesday, September 11, 2001 6:31 PM