Lanier JP1030 User Manual
Page 27
Standard Printing
15
1
Note
❒ If the image position is not
correct, adjust it using the
{{{{Image Position}}}} keys or the
fine adjustment dial. See p.18
“Adjusting the Print Image
Position”.
❒ If the image density is slight-
ly dark or light, adjust the
image density using the
{{{{W
W
W
W}}}}
or
{{{{V
V
V
V}}}} key. See p.20 “Adjust-
ing the Print Image Density”.
D Enter the number of prints
with the number keys.
Note
❒ Up to 9999 prints can be en-
tered at one time.
❒ To change the number en-
tered, press the
{{{{Clear/Stop}}}}
key and enter the new num-
ber.
E Press the {{{{Print}}}} key.
Note
❒ After printing is completed,
the same number of prints is
automatically set for the next
job.
❒ To stop the machine during
the multi-print run, press the
{{{{Clear/Stop}}}} key. See p.24
“S t oppi n g a M ul t i- pri nt
Run”.
❒ To return the machine to the
initial condition after print-
i n g , p r e s s t h e
{{{{Cl ear
Modes/Energy Saver
}}}} key.
PinkGold-F_V4_FM.book Page 15 Tuesday, September 11, 2001 6:31 PM