Lanier JP1030 - Manual (Page 64)

Optional Functions
52
2
Printing in Two Colors
After printing in one color, you can
print in another color on the same
side of the print.
Important
❒ Let the ink on the prints dry for a
while before printing on them
again.
❒ If the prints are not dry, the paper
feed roller might become dirty. In
this case, wipe off the roller with a
cloth.
Note
❒ You cannot print in two colors at
one time.
AAAA
Prepare two originals. Place the
first original on the exposure
glass or in the optional document
feeder.
BBBB
Enter the number of prints with
the number keys.
CCCC
Press the {{{{Start}}}} key.
Printing starts automatically after
trial print is delivered.
Note
❒ If you want to check the print
image, press the
{{{{Auto Cycle}}}}
key to turn off Auto Cycle mode
before pressing the
{{{{Start}}}} key.
For details, see p.14 “When
Auto Cycle is off”.
GRCOLO0E
R
P
R
P
ZDCH110E
PinkGold-F_V4_FM.book Page 52 Tuesday, September 11, 2001 6:31 PM