Lanier JP1030 - Manual (Page 39)

Zoom
27
1
Zoom
Use this function to fine-tune the re-
production ratio in 1% steps.
Note
❒ The range in which you can select
a ratio is 50–200%
AAAA
Select the desired reproduction
ratio with the
{{{{ }}}} or {{{{ }}}} key.
The ratio is displayed on the zoom
counter.
Note
❒ You can select a preset ratio
which is near the desired ratio,
then adjust the ratio with the
{{{{ }}}} or {{{{ }}}} key.
BBBB
Place your originals on the expo-
sure glass or in the optional docu-
ment feeder.
CCCC
Enter the number of prints with
the number keys.
DDDD
Press the {{{{Start}}}} key.
Printing starts automatically after
trial print is delivered.
Note
❒ If you want to check the print
image, press the {{{{Auto Cycle}}}}
key to turn off Auto Cycle mode
before pressing the
{{{{Start}}}} key.
For details, see p.14 “When
Auto Cycle is off”.
GRZOOM0E
PinkGold-F_V4_FM.book Page 27 Tuesday, September 11, 2001 6:31 PM