Life Fitness 93T - Manual (Page 76)

2B-9
Life Fitness Model 97Te, 95Te, 97Ti, 95Ti and 93T Arctic Silver Treadmills
DISPLAY CONSOLE 97Te and 95Te LCD
SYSTEM TEST MENU 1 – MOTOR MODULES
This test allows evaluation of the main motor, lift motor, and "home" switch operation.
Error message area
Displays any current errors when a module (LIFT or main MOTOR) is selected.
MODULE Selection of LIFT motor or main MOTOR.
MODE Selects automatic or manual modes for lift and main motor activation.
SWITCHES Displays a lit condition when "home" switch has been activated.
ACTUAL (COUNT and %) Displays software equivalent count of lift motor position and incline angle.
INCLINE The incline can be adjusted by pressing the incline ARROWs only on the overlay.
CURRENT TRIP Displays a lit condition when motor current exceeds a predetermined trip value.
INFO
Displays real-time information regarding wattage consumption, % power available,
motor controller heat sink temperature, and voltage available to main motor.
ACTUAL (RPM & MPH) Displays main motor rpm and belt speed in mph.
SPEED The speed can be adjusted by pressing the speed ARROWs only on the overlay.
Lift Motor "home" Switch Evaluation Procedure - Operate lift motor and ensure mechanism moves smoothly
between 0 and 15% incline. Make certain HOME indicator is lit when incline value is zero.
Belt and Deck Evaluation Procedure - Walk on treadmill for one minute at 3.5 mph. Increase speed to 7 mph and
note power consumption (Watts) reading after one minute. Power consumption in excess of 1100 watts indicates
excessive belt to deck wear. Replace belt and deck (deck may be flipped once) as needed.
► Return to the previous screen by pressing the BACK key.
► Press the MAIN MENU key to return to the MAIN MENU screen.