How to... replace the telemetry receiver – Life Fitness 93T User Manual

Page 153

3-38

Telemetry
Cable

Telemetry
Receiver

Adhesive
Pad

Console
Front

Console
Back

Life Fitness Model 97Te, 95Te, 97Ti, 95Ti and 93T Arctic Silver Treadmills

How To... Replace the Telemetry Receiver

Special Service Tools Required: NONE

1. Turn the unit power OFF at the

switch then unplug the line cord at
the wall outlet.

2. Remove eight screws from the

Console Back. See “How To…” in
this section.

3. Lift off the Console Front and

disconnect necessary wiring.

4. Remove the Telemetry Receiver and

Cable from the inside left corner of
the Console Front, which is held in
place with an adhesive pad

5. Install new Telemetry Receiver with

new Adhesive Pad in reverse order.

6. Re-install the Console Front to the

Console Back, making sure all
connectors are firmly installed.