Life Fitness 93T - Manual (Page 6)

v
Life Fitness Model 97Te, 95Te, 97Ti, 95Ti and 93T Arctic Silver Treadmills
GLOSSARY
Familiarize yourself with those words and acronyms commonly referred to in this manual.
Anti-Scuff Pads Rubber strips located on the surface of each side of the frame, and used to ensure
sure footing.
Connectors Plastic devices used to connect wiring together.
Deck Special particleboard that is used for the running surface.
Display Console
Board Electronic board used for making direct input settings and monitoring output
messages, which are displayed in the digital readout display.
EEPROM Electrically erasable programmable read only memory.
EEROM Electrically erasable read only memory.
Frame Tag
Board Stores maintenance and error data with date and time stamp.
Front Roller Motor belt driven, the front roller drives the striding belt.
HR Sensor Located in each handle grip and measures heart rate.
Idler Pulley
Assembly A spring-loaded bracket assembly pulley, which is used to maintain constant load
against the main drive belt.
Jumper Electrical connector used to connect between two electrical points.
LED Light Emitting Diodes.
LCD Liquid Crystal Display
Levelers Adjustable supports under the rear of the treadmill, which are used to stabilize the
unit.
Lift Motor The motor that raises and lowers the unit for incline and decline operations.
LifePulse Measures heart rate.
LifeSprings Springs under the deck to absorb impact of the walker or runner.