How to... tension new striding belt – Life Fitness 93T User Manual
Page 124
3-9
50”
Tape
50.25”
Tape
Life Fitness Model 97Te, 95Te, 97Ti, 95Ti and 93T Arctic Silver Treadmills
How To... Tension New Striding Belt
Special Tools Required: None
1. Center the loose striding belt on front
and rear rollers.
2. Place two pieces of masking tape 50”
apart on the right and left side edges
of the striding belt as shown.
3. Tighten tensioning bolts until the
distance between tapes (both sides)
is increased to 50.25”. At this point,
the belt is properly tensioned.
4. Adjust the striding belt tracking. See
How To... Adjust the Striding Belt
Tracking.
NOTE: Refer to MAINTENANCE in
diagnostics section to log this event.
See also other documents in the category Life Fitness Sports and recreation:
- T3 Treadmill (6 pages)
- F3 Folding Treadmill (12 pages)
- T5 Treadmill (1 page)
- T7 Treadmill (8 pages)
- T3 Treadmill (19 pages)
- Platinum Club Series Treadmill (21 pages)
- Arctic Silver T3.5 Treadmill (9 pages)
- FZTP (17 pages)
- MTSLE (18 pages)
- Sport and Essential Consumer Treadmills (3 pages)
- CTSX30-0102-01 (8 pages)
- Cable Motion 8352100 REV. B (26 pages)
- Cable Motion 39721 (24 pages)
- Pro 2 Series PSPD (11 pages)
- 91Xi (83 pages)
- 91TW (22 pages)
- Utility Bench (8 pages)
- Hammer Strength OHDRacks (6 pages)
- 8216 (7 pages)
- GS5 (11 pages)
- TR-7500 (3 pages)
- Parabody 805 (11 pages)
- HDCR9 (13 pages)
- 18 \ 90 Series (8 pages)
- OHD-MIP (10 pages)
- Pro 2 Series PSFLY (10 pages)
- Hammer Strength OHDMR (15 pages)
- GS6 (1 page)
- UPRIGHT LIFECYCLE 95C (1 page)
- LIFECYCLE R3 (2 pages)
- GS4 (12 pages)
- FZHAD (13 pages)
- FIT 3 (1 page)
- 889 (16 pages)
- MTSRL (21 pages)
- 887 (16 pages)
- GK53-00002-0012 (2 pages)
- C3 (2 pages)
- Pro 2 Series PSSLPSE (22 pages)
- T7i (8 pages)
- Arctic Silver 93XW-0XXX-03 (17 pages)
- 874 (12 pages)
- Classic Series Cross-Trainer CLSXH (8 pages)
- Exercise Bike Inspire Console 97C Lifecycle (42 pages)
- Hammer Strength MTS (6 pages)