Life Fitness 93T - Manual (Page 134)

3-19
Polley V Pulley
Hex Bolt
Flat Washer
Lock Washer
Mounting Bolt
Flat Washer
Front Roller
Lock Washer
Life Fitness Model 97Te, 95Te, 97Ti, 95Ti and 93T Arctic Silver Treadmills
How To... Replace the Front Roller - Continued
Special Service Tools Required: NONE
8. With the Front Roller out.
Remove the Pulley and
Hardware and save for the
new Front Roller.
9. Install Pulley on the new
Front Roller.
10. Install the Front Roller into
position and secure in place
with the mounting bolt, lock
washer, and flat washer on
the left side of the roller
shaft.
11. Make sure that the Motor
Drive Belt is positioned on
left side groves of the Front
Roller Pulley.
12. Lower the Idler Arm Roller
against Drive Motor Belt.
13. Refer to “How To…” Adjust Striding Belt Tracking or Tensioning in this section.