How to... replace the console assembly – Life Fitness 93T User Manual

Page 155

3-40

Mounting

Screws (6)

Life Fitness Model 97Te, 95Te, 97Ti, 95Ti and 93T Arctic Silver Treadmills

How To... Replace the Console Assembly

Special Service Tools Required: NONE

Note: To disconnect the wiring leading inside the Console
Assembly, the Console Assembly must be split.

1. Turn the unit power OFF at the switch then unplug the line

cord at the wall outlet.

2. Remove six mounting screws from the back of each Cup

Holder.

3. Lift the Cup Holders up and out of the Uprights being careful

of the Heart Rate and Smart Stop Cables.

4. Remove eight screws from the Console Back and lift out the

Console Front while disconnecting electrical connectors
from the Console Power Control Board (PCB).

5. Install new Console Assembly in reverse order.

6. Install the Cup Holders back into the Uprights being careful of the electrical cabling.

7. Refer to Diagnostics Sections to Log Maintenance Repair of the Display Console Control Panel.